WEEDMAR SUPER - 2,4-D DIMETHYL AMINE SALT 58% SL - DHANUKA
Weedmar Super from Dhanuka contains 2,4-D dimethyl amine salt 58% SL, a systemic post-emergence herbicide. It is not interchangeable with sodium-salt or ester products. Use the current exact label to resolve the crop-specific method, rate, water and restrictions.
Weedmar Super Herbicide | 2,4-D Dimethyl Amine Salt 58% SL
A systemic post-emergence herbicide for the manufacturer-listed weed associations below. The exact crop programme must be resolved from the current label before application.
What it controls: Primarily broad-leaved weeds, with the manufacturer’s specific crop–weed associations listed below.
When to use it: After weed emergence, only at the crop and weed stage allowed by the supplied label.
What to include: The exact 58% SL identity, crop-specific method and full current-label directions; no universal tank recipe is given.
Why Choose This Product? Key Benefits
- 🌿Acts inside susceptible weeds: The active is absorbed and moves within the weed, instead of acting only at the place initially contacted.
- ⚙️Disrupts normal growth signals: As a synthetic auxin, 2,4-D imitates a plant growth signal and causes disordered growth in susceptible weeds.
- 🎯Crop–weed scope stays visible: Individual crop lists make it easier to avoid transferring a target from one crop or site to another.
- 📏Formulation differences are clear: This soluble amine formulation is not Weedmar 80 sodium salt or a 2,4-D ester. Their product rates are not interchangeable.
- 🛡️Crop protection remains central: Selective activity still depends on crop, growth stage and placement. It does not mean all crops are protected from drift or misuse.
Technical Specifications
| Parameter | Details |
|---|---|
| Brand Name | Weedmar Super Herbicide — Dhanuka Agritech Limited. |
| Technical Name | 2,4-D dimethyl amine salt 58% SL. |
| HRAC MoA Code | Group 4: synthetic auxin (auxin-mimic herbicide). |
| Chemical Group | Phenoxycarboxylate herbicide. |
| Formulation | SL: soluble concentrate. Do not substitute directions for 2,4-D sodium salt or ester formulations. |
| Toxicity Label | Use the hazard information and protective measures on the supplied pack; no toxicity colour band is assigned here. |
How It Works: Mode of Action
Weedmar Super is described by Dhanuka as selective, systemic and post-emergence. These terms do not establish a universal safe crop stage or a dose for every field.
- The weed takes up the active: The manufacturer describes uptake through leaves and roots. Uptake pathways alone are not a complete instruction for how to apply the product in a particular crop.
- The active imitates a growth signal: 2,4-D acts like an auxin, a natural plant growth regulator, but causes abnormal signalling in susceptible weeds.
- Normal weed development breaks down: Uncontrolled growth and disruption of normal plant functions damage the weed. Desired broadleaf plants can also be injured by exposure.
Use the exact label and local integrated weed-management advice. Group 4 applies across the active ingredient, not just this brand. Do not assume a second 2,4-D salt or ester is a different mode of action.
Target Crops & Pests
The manufacturer lists these crop–weed associations. They identify the published scope only; numerical recommendations are withheld until the current exact-label programme is established.
| Crop | Target Pest(s) |
|---|---|
| Maize |
|
| Wheat |
|
| Sugarcane |
|
| Sorghum |
|
| Potato |
|
| Tea | Separate manufacturer listing; exact-label use to verify
|
The page also lists water hyacinth (Eichhornia crassipes), Parthenium hysterophorus and Cyperus rotundus under aquatic/non-cropped uses. No operational aquatic or non-crop programme is supplied here. A site mention is not permission to treat drinking water, fish water or every non-cropped area.
The manufacturer’s individual weed lists must not be expanded into a general claim that 2,4-D controls all grasses or sedges.
Dosage & Application Guide
Numerical recommendations for all listed crops are withheld because the manufacturer page contains materially different rates between its main and legacy tables, and does not establish a complete primary application method.
Dosage per Acre, Litre, & Pre-Harvest Interval (PHI)
| Crop | Dose (ml / Acre) | Water (L / Acre) | Dose (ml / Litre) | PHI (Days) |
|---|---|---|---|---|
| Listed crop uses | See note* | See note* | See note* | See note* |
Use the current supplied Weedmar Super 58% SL label to establish the complete crop–weed–method–dose–water–timing record. Do not select the larger or smaller of differing web rates, average them, or substitute another 2,4-D formulation.
*A current exact Indian brand leaflet was not available. Product amount, water, concentration and PHI are therefore not offered as an operational recipe here. Missing values do not mean zero, unrestricted use or suitability for every crop stage.
No independent per-litre dose, pump recipe, repeat interval, numerical re-entry period or blanket tank mix is established. Tea and aquatic/non-crop mentions also require their own exact-label verification.
How to Apply: Best Practices
- Check the product identity: Use the directions for 2,4-D dimethyl amine salt 58% SL. Do not take a powder weight, ester-liquid volume or another product’s rate as an equivalent.
- Confirm the crop and weed: Match both with the supplied label. Crop stage can affect selectivity, so a crop name alone is not enough to choose a treatment.
- Resolve the application method: Obtain the exact crop-specific method and full dilution before preparing product. Leaf and root uptake do not authorize a guessed soil drench or foliar programme.
- Prevent off-target exposure: Keep treatment away from neighbouring susceptible plants. Follow label instructions on wind, drift, equipment and cleaning, especially before using equipment on sensitive crops.
- Keep restrictions and records: Record the treatment and follow actual harvest, re-entry, repeat and site restrictions. Do not treat an aquatic or non-crop site without the required exact-label instructions.
Frequently Asked Questions
1. Is Weedmar Super the same as Weedmar 80?No. This entry is 2,4-D dimethyl amine salt 58% SL. Weedmar 80 is a differently named sodium-salt product. Product identity and instructions must be checked rather than converting between them by assumption.
2. Why does this description not show a spray rate?The manufacturer page has conflicting crop rates and incomplete method details. Publishing a selected figure would create a programme that has not been fully verified. Use the current exact pack leaflet to resolve it.
3. Does selective mean it cannot injure crops?No. Selectivity depends on the crop, stage, dose and placement. Wrong use or drift can injure desirable plants, especially susceptible broadleaf plants.
4. Can I use it for every grass or sedge?No. The published list includes specific weed associations, not a blanket claim for all grasses or sedges. Identify the weed and check the exact crop label.
5. Can I use the same programme in an aquatic site?No. Crop and aquatic/non-crop uses have different exposure conditions and restrictions. This description supplies no operational aquatic programme or permission to treat a water source.
Safety & Disclaimer
Keep the product in its original labelled container, away from food, feed, children and animals. Wear the protective clothing and equipment specified on the pack. Avoid breathing spray or dust and prevent skin and eye contact. Do not eat, drink or smoke during handling.
Keep spray, leftover product and equipment washings out of water sources. Do not reuse empty pesticide containers. Follow the supplied label and local rules for safe storage, equipment cleaning and disposal.
If exposure or illness occurs, stop work and seek medical advice promptly with the product container or label. Read and follow the supplied product label and accompanying leaflet, including all crop, application, harvest and re-entry restrictions.
- Free delivery across IndiaUsually 3–7 business days
- 7-day free returnsOn unopened products in original packs
- Trusted brandsSyngenta, FMC, Bayer, BASF and more